Strong 1:1AB adhesive
一、Product Presentation
 This product is used for reinforcing stone waste materials and bonding back nets. During the processing of stone, there may be losses such as breakage, breakage, and collapse due to strong vibrations caused by sawing, material (brittleness) issues, incorrect judgment of the sawing direction by the sawing master, and failure to immediately stop work due to fragmentation during the sawing process.
二、Product Characteristics
- It can effectively penetrate and adhere to the stone, and rely on its wrapping to increase tensile strength
Solid.
- Strong adhesion, medium to high viscosity, non dripping, easy operation, and good stability after curing.
三、Product Usage
- Surface treatment: Remove attached dust, loose materials, oil stains, and other contaminants
Keep debris dry.
- Glue configuration: A set of special glue A for waste material composite and B glue for waste material composite, mixed in a 1:1 weight ratio.
- After stirring, pour the glue into the bucket → apply glue to an uneven area on the flat surface → apply glue to an uneven area at the bottom → fill glue to cracks → fill glue to depressions → apply platinum mesh → apply glue to overlapping areas of platinum mesh → after completing the application of platinum mesh, apply another layer of glue to an uneven area, then apply glue to four corners and strengthen the platinum mesh strip by four corners before applying glue.
四、Technical Indicator
Matters Needing Attention
- Please store in a dry and ventilated place away from light. After use, please seal and protect the product as it is
Save.
- Safety measures at the workplace: Items such as gloves, masks, and eye protection must be present.
- When the eyes or skin are contaminated, immediately rinse with detergent and running water. If you feel uncomfortable, seek medical attention immediately.
五、Packaging and Storage
The packaging of the strong 1:1AB adhesive is a 25KG net weight metal barrel resin in the original packaging barrel, without direct sunlight and at a temperature not exceeding 30 ℃. It can be stably stored for six months from the date of leaving the factory. Raising the temperature will correspondingly shorten the storage period, and the viscosity of the resin may also change. When storing, it should be placed in a cool and ventilated place. This product is flammable and should be kept away from direct sunlight and heat sources and open flames.
Product Appearance:
Application Image：
